Driveway, Patio & Concrete Cleaning

Concrete is porous. Mildew, algae, tire marks, rust from sprinklers, leaf tannins and oil all soak in, and in our climate a white driveway can turn grey-green in a single season. Cleaning it right takes more than a wand and a weekend.

We pre-treat stains, clean flatwork with rotary surface cleaners for even coverage, detail edges and expansion joints, and post-treat to slow regrowth. It’s the same process whether it’s a single driveway or a shopping center’s sidewalks.

Concrete & hardscape we clean

Driveways
Sidewalks & walkways
Back patios & porches
Pool decks
Garage floors
Pavers & stamped concrete
Curbs & gutters
Dumpster pads & loading areas

Our concrete cleaning process

Pre-treat oil drips, rust and organic stains so they lift during cleaning.
Surface clean the flatwork with a rotary cleaner for an even, streak-free finish.
Detail edges, steps and expansion joints by hand.
Post-treat to kill remaining growth and brighten the concrete.
Rinse everything down — walls, doors and landscaping included.

Can every stain come out?

Most organic staining — mildew, algae, dirt, leaf marks — comes out completely. Deep oil, rust and irrigation stains usually lighten dramatically, but some older stains have soaked in too far to disappear entirely. We’ll tell you upfront what to expect.

Pairing concrete cleaning with a house wash is the most popular package we offer — it makes the whole property look refreshed at once.

Driveway, Patio & Concrete Cleaning near you

Based in Seabrook, we provide driveway, patio & concrete cleaning throughout the Houston Bay Area, including:

Driveway, Patio & Concrete Cleaning FAQs

Why does my driveway have stripes after I pressure wash it?

Stripes come from a wand held at inconsistent distances. Commercial surface cleaners spin at a fixed height, which cleans evenly and eliminates striping.

Can you remove oil stains?

We pre-treat oil stains with degreaser, which lifts fresh and moderate stains well. Very old or deep stains usually lighten significantly but may not vanish completely.

Is it safe to clean pavers?

Yes. We adjust pressure for pavers and avoid blasting out the joint sand. If your pavers need re-sanding or sealing afterward, we’ll let you know.

How soon can I drive or walk on the concrete?

Right away. Concrete is safe to walk and drive on as soon as we’re finished; it just may look darker until it fully dries.